- New
Multi-Function: This Digital Clamp meter multimeter can measure AC current, test AC and DC voltage, Low impedance, serve as continuity, resistance, and capacitance tester. It can also measure temperature, frequency, and duty cycle.
Non-Contact Voltage Detection: Without touching any wires the instrument can check electrical status, and detect whether the conductor being measured carries a voltage higher than 90 V AC.
Bonus Items: This digital clamp meter also comes with normal and needle types of probes, test clips, dupont wire probes, crocodile clips, mini crocodile cable, thermocouples, mini wire stripper tool, mini screwdrivers, an electrical tape, and a downloadable e-book.
Check the model of clampmeter on your Amazon Cart before check-out
See description for more details
• Multi-Functions: This Digital Clamp meter multimeter can measure AC current, test AC and DC voltage, Low impedance, serve as continuity, resistance, and capacitance tester. It can also measure temperature, frequency, and duty cycle.
• No Contact Voltage Detector: Without touching any wires the instrument can check electrical status, and detect whether the conductor being measured carries a voltage higher than 90 V AC.
• Various Features: This clamp meter includes various features such as LCD display, low battery detector, overload protection, auto power-off after 15 minutes, and many more.
• Bonus Items: This digital clamp meter also comes with normal and needle types of probes, test clips, dupont wire probes, crocodile clips, mini crocodile cable, thermocouples, mini wire stripper tool, mini screwdrivers, an electrical tape, and a downloadable e-book.
• Satisfaction Guarantee: The Plusivo Clampmeter is backed by the manufacturer with a 30-day money-back guarantee and lifetime customer support for customer’s satisfaction.
• AC current range: 0.1A to 600A
• DC voltage range: 0.001V to 600V
• AC voltage range: 0.01V to 600V
• Frequency range: 40 ~ 1000 Hz
• Capacitance Range: 0.1 nF - 60 mF
• Temperature range: -200 ~ 1300°C 1°C ± (1% reading + 2°C), -328 ~ 2372°F 2°F ± (1% reading + 4°F)
• AC current measurement up to 600A
• AC current measurement 60A / 6A
• Temperature measurement
• AC and DC voltage measurement
• Capacitance / Continuity / Resistance / Diode
• Low impedance voltage measurement
• Frequency measurement
Features
• Auto-range mode
• Low battery indicator
• Hold Function / backlight and flashlight
• Overload protection
• Auto power off after 15 mins
• Over range display
• 1 pc Digital Clamp Meter (AC Current Clamp Meter)
• 1 pair Needle Tipped Test Probes with Silicone Cover (gold plated, Cat II. Voltage: 1000V, Current: 20A)
• 1 pair Normal Test Probes with Silicone Cover (gold plated, Cat III. Voltage: 1000V, Current: 20A)
• 1 pair Alligator Clip Test Leads
• 1 pair Double-ended Alligator Clips Wire
• 1 pair Male Dupont Jumper Wire to Alligator Clip
• 1 pair Female Dupont Jumper Wire to Alligator Clip
• 1 pair Mini Grabber Test Hook Clips to Alligator Clip
• 1 pair U-type Test Fork Clips to Alligator Clip
• 1 pc Thermocouple
• 1pc mini wire stripper tool
• 2pcs mini screwdrivers
• 1pc Black electrical tape
• 1pc Plusivo flyer (contains instructions on how to downloadable bonus Ebook, if unsuccessful, please contact seller)
• This clamp meter can measure AC current.
•It can measure AC current from 0.1A to 600A.
• This clamp meter can measure both AC and DC voltages.
• It can measure DC voltage from 0.001V to 600V
• It can measure AC voltage from 0.01V to 600V
• This clamp meter can measure resistance with voltage overload protection up to 250 V AC or DC.
• This clamp meter can measure temperatures at the following ranges:
• -200 ~ 1300°C 1°C ± (1% reading + 2°C)
• -328 ~ 2372°F 2°F ± (1% reading + 4°F)
• If the low battery indicator appears on the LCD, then the batteries need to be changed.
• Can hold the current reading on the instrument's display
• Note: flashlight only works during current measurement - set the knob to current function, then press the backlight button for longer than 2 seconds in order to turn on the LCD backlight and the flashlight.
• After being idle for more than 15 minutes, the instrument will enter automatically in standby mode in order to save power.
• When the instrument detects AC voltage the buzzer gets activated and the NCV alarm light will flash.
Specific References
No customer reviews for the moment.